Oblium Logo - Hologram Sticker

Follow these simple steps to ensure a perfect application of your Labyrinthine Crew decal sticker:

Materials Needed:

• Your Labyrinthine Crew decal sticker
• A clean, dry cloth
• A squeegee or credit card

The decal stickers you receive in the envelope are formed by 3 layers: 

Steps:

1. Prepare the Surface:

   • Ensure the surface where you will apply the decal is clean and dry.
   • Wipe the area with a clean, dry cloth to remove any dust, dirt, or grease.

2. Position the Decal:

   • Carefully peel off the backing paper from the decal sticker, making sure the sticker stays attached to the transfer tape.
   • Position the decal where you want to apply it. You can lightly place it to check alignment before fully pressing it down.

3. Apply the Decal:

   • Once you're satisfied with the positioning, press the decal onto the surface. Start from the center and work your way outwards to prevent air bubbles.
   • Use a squeegee or a credit card to firmly smooth over the transfer tape, applying even pressure to ensure the decal adheres well.

4. Remove the Transfer Tape:

   • Slowly and carefully peel off the transfer tape, starting from one corner and pulling it back at a 45-degree angle.
   • Ensure the decal remains adhered to the surface as you peel away the transfer tape.

5. Smooth Out Bubbles:

   • If any air bubbles remain, gently press them out towards the edge of the decal with your fingers or the edge of a credit card.

Tips:

• For best results, apply the decal in a temperature range of 10°C to 25°C (50°F to 77°F).
• Avoid touching the adhesive side of the decal with your fingers to maintain its stickiness.
• Allow the decal to set for 24 hours before exposing it to water or heavy use.

Thank you for supporting Labyrinthine Crew! Enjoy your new stickers!

We ship all sticker's orders of the week, in bulk, on every Friday.