How to Apply Your Labyrinthine Crew Decal Stickers

Follow these simple steps to ensure a perfect application of your Labyrinthine Crew decal sticker:

Materials Needed:

  • Your Labyrinthine Crew decal sticker
  • A clean, dry cloth
  • A squeegee or credit card

 

The decal stickers you receive in the envelope are formed by 3 layers: 

 

Steps:

  1. Prepare the Surface:

    • Ensure the surface where you will apply the decal is clean and dry.
    • Wipe the area with a clean, dry cloth to remove any dust, dirt, or grease.

  2. Position the Decal:

    • Carefully peel off the backing paper from the decal sticker, making sure the sticker stays attached to the transfer tape.
    • Position the decal where you want to apply it. You can lightly place it to check alignment before fully pressing it down.

  3. Apply the Decal:

    • Once you're satisfied with the positioning, press the decal onto the surface. Start from the center and work your way outwards to prevent air bubbles.
    • Use a squeegee or a credit card to firmly smooth over the transfer tape, applying even pressure to ensure the decal adheres well.

  4. Remove the Transfer Tape:

    • Slowly and carefully peel off the transfer tape, starting from one corner and pulling it back at a 45-degree angle.
    • Ensure the decal remains adhered to the surface as you peel away the transfer tape.

  5. Smooth Out Bubbles:

    • If any air bubbles remain, gently press them out towards the edge of the decal with your fingers or the edge of a credit card.

Tips:

  • For best results, apply the decal in a temperature range of 10°C to 25°C (50°F to 77°F).
  • Avoid touching the adhesive side of the decal with your fingers to maintain its stickiness.
  • Allow the decal to set for 24 hours before exposing it to water or heavy use.

Thank you for supporting Labyrinthine Crew! Enjoy your new stickers!